This series of products includes fiberglass reinforced, flame-retardant, and flame-retardant reinforced nylon 1010. They can replace copper metal, have higher molecular weight, lower water absorption, and better thermal stability.

This series of products includes fiberglass reinforced, flame-retardant, flame-retardant reinforced, toughened and reinforced nylon 66, among others. They have high strength, good self-lubricating properties, and small friction coefficients, making them a longer service life as transmission components.

This series of products includes fiberglass reinforced, flame-retardant, flame-retardant reinforced, and toughened nylon 6. The melting point of these products is lower, and their impact resistance and solubility are better than nylon 66.

Description：This product is a gray black smooth pen shaped lubricating product

Main use：Suitable for oil-free lubrication on cutting tools such as drill bits, turning tools, and taps, which can extend the service life of the cutting tools, improve the smoothness of the machining body, and have a significant effect on processing stainless steel, alloy steel, and materials with high toughness and hardness. Applying this product on the polishing tape can improve the smoothness by 1-2 levels and shorten the polishing time.

Usage： When using this product, first install the machining parts and the cutting tools used in the machining equipment. Operate the cutting tools slightly on the machining parts a few times to make the tool head reach nearly 80 ℃. Then, apply this product a few times on the tool. When there is a gray layer of molybdenum disulfide on the head, normal cutting and drilling can be carried out (without applying too much). After a certain period of operation, the molybdenum disulfide will be ground off and can be repeatedly applied.

Packaging：This product is packaged in transparent small plastic bags, with 10 pieces per bag and 600 pieces per 60 bags packed in a cardboard box.

Storage conditions：During storage and transportation, it is easy to avoid heavy pressure and store indoors at temperatures below 50 ℃.

Description：This product is a liquid suspension solution of molybdenum disulfide powder suspended in mineral oil

Main use：This formulation can improve the compressive performance of lubrication, and is used for high load and high-speed rotating bodies. It is highly compatible with the requirements of precision tools and engines to improve lubrication performance. It is an additive that reduces wear rate and prevents interface corrosion of mechanical sliding or rotating parts. It is a wear reducing agent for the rotating parts of the gear shaft; Improving the service life of stamping dies, increasing product smoothness, reducing mechanical temperature, extending the service life of lubricating oil, and adding various long or cloth oil holes can reduce oil volume and refueling frequency.

Usage：This product can be diluted with 20-50 mechanical oil to a content of 0.4-1.5% molybdenum disulfide (i.e. diluted with 75-20 times the original engine oil), then stirred evenly before use.

Packaging：20 kilograms per barrel.

Storage conditions：This product should be protected from direct sunlight and stored in high temperatures. It should be stored indoors at temperatures below 50 ℃.

Description：This preparation is a highly dispersed and pure graphite emulsion suspended in water.

Main use：

(1) Lubricants for drawing refractory metals such as tungsten and molybdenum wires;

(2) Coating agent for die-casting non-ferrous metal thin parts at high temperatures;

(3) Superheated steam station, steam cylinder turbine spiral slurry insulation agent;

(4) Trimming agent for photographic plates;

(5) Other industries increase conductivity, high-temperature insulation, chemical inertness, opaque adhesion and immersion of non oily high-temperature (600 ℃) lubricating materials。

Usage：When using, it is necessary to dilute and stir evenly with distilled water or deionized water. Depending on the needs, methods such as wiping or soaking can be used. After use, tie the bag tightly or cover it tightly。

Packaging：Divided into two types: 1 kg, 35 kg, etc.

Storage conditions：Store indoors at 5-25 ℃ to prevent freezing or thermal deterioration. The storage period is six months.

Molecular formula：(NH₄)6mo7O₂₄4H₂O

Description：Colorless or slightly blue-green crystals, soluble in water but insoluble in ethanol.

Specification:MoO5 content ≥ 81%

Purpose：Electrical materials, raw materials for electric light source equipment, molybdenum products, alloy steel additives, petrochemical agents, pigments and flame retardants, etc.

Packaging：Net weight of 25 kilograms, fiberboard barrel, inner village plastic film bag.

Storage conditions：This product should be placed in a dry and ventilated place.

Molecular formula：H₂MoO₄

Description：White or with blocky substance or powder. Specific gravity 3.14 (15 ℃), slightly soluble in water, soluble in or in ammonium hydroxide solution.

Specifications：H₂MoO₄content85%-90%。

Purpose：Blue pigments and coatings used to manufacture molybdenum catalysts, ceramic coatings, etc., are also raw materials for the production of molybdenum salts.

Packaging：Net weight of 25 dry grams, packed in fiberboard and wooden barrels, lined with plastic bags and packaged in wooden barrels.

Storage conditions：Store in a dry and ventilated place. After use, tie the bag tightly or cover it tightly to prevent moisture absorption.

Description：This product is a highly dispersed colloidal molybdenum disulfide particle with high purity and strong adsorption, made from natural molybdenite concentrate through chemical purification. Its appearance is black with a slight silver gray color, with a metallic luster and a hardness of 1-1.5. It feels slippery to the touch and is insoluble in water. It dissolves in concentrated nitric acid and aqua regia to form molybdenum oxide.

Technical requirement：

Indicator Name Index 

 MF-00 MF-0 MF-1

Molybdenum disulfide content％≥98.096.096.0

Moisture％≤ 0.500.50 0.50

Total insoluble substances％≤ 2.0 2.02.0

Iron (Fe) content％≤0.3 0.30.3

Copper corrosion ≤ qualified qualified qualified

Particle size D50／μm％ D50≤1.5 1.5≤D50≤2.5 2.5≤D50≤5.0

Purpose：

1. This product is the substrate for various molybdenum disulfide products.

2. MF-00 has a finer particle size and is suitable for adding to various engine oils to increase their lubrication and pressure resistance. It can also be thoroughly stirred with various volatile liquids or epoxy resin substances and sprayed on metal surfaces as a base film. MF-1 is suitable for adding to various lubricating oils; MF-0 is suitable for adding to nylon 1010, nylon 66, toluene polytetrafluoroethylene, etc., as a filler for various nylon products. It can also be added to metal powder as a powder metallurgy mist.

3. When installing giant screws or fixed large shafts, mix them evenly with alcohol and spray them onto the surface of the machine or screws with a brush or general spray gun. This can avoid the biting of the shaft and sleeve and the rusting of the screws, reducing difficulties in loading and unloading and damage to the machine.

4. It can be used as a forging lubricant and a release agent for non-ferrous metals.

Packaging：MF-00 and MF-0 powders are packaged in two types: 1kg and 15kg. MF-1 powder, packaged in two types: 1kg and 20kg.

Storage conditions：This product must be stored in a dry and ventilated place. If it encounters humid air during use, the powder is prone to moisture absorption and must be dried. After use, tie the bag tightly or cover it tightly to prevent powder bonding or impurities from mixing in.

Technical requirement：

Indicator Name Index 

  #00 #0 #1#2特#2#3

Moisture%≤ 0.50.50.50.50.50.5

Purity of dry graphite powder%≥  99.0099.00 99.0098.5098.5098.50

Graphite grayscale%≤  1.00 1.001.001.501.501.50

PH Value 6-76-76-76-76-76-7

Particle size≤1.5%≥90     

 ≤2.3%≥ 90    

 ≤4.0%≥  90   

 ≤15%≥   90  

 ≤10%≥    90 

 ≤30%≥     90

Purpose：

1. High temperature resistant lubricant base material, corrosion-resistant detergent base material.

2. Precision casting sand.

3. As a filling material for rubber and plastic, to improve the wear resistance and compression resistance of plastics or to make conductive materials.

4. Metal alloy raw materials and carbon from powder metallurgy.

5. Used for making carbon film resistors, lubricating and conducting dry films, and preparing conductive liquids.

6. Used as gasket coating for high-pressure steam pipelines and high-temperature pipeline connectors.

7. Used as a carrier for producing graphite anodes and catalysts.

[Note] Any graphite powder that requires special requirements can be negotiated with our company.

Packaging：Divided into five types: 0.5 kg, 1 kg, 5 kg, 10 kg, 15 kg, etc.

Storage conditions：Store in a dry and ventilated place.