Appearance：Pink suspension

Cobalt Content：7.8%～8.2%

PH：7～8

Solvent：Water

Performance Characteristics：
* Quickly demonstrate the effectiveness of the system
* Excellent hydrolysis resistance
* Excellent additive properties and good miscibility with resin
* Used in various systems, such as water-based epoxy esters, water-based alcohol acids, and other air dry oxidation crosslinking systems
* Used in clear and colored paints
* Extremely low VOC

Appearance：Purple red liquid

Metal Content：13.0%～14.0%

Flash Point，℃：＞60℃

Solvent：Alcohol ether, Mineral oil

Performance Characteristics：
* A water-based product composed of multiple metal composites can provide good initial water resistance and excellent later hardness of the coating film
* It can also be used in light colored paints, without causing yellowing of the coating, and can achieve fast drying and stable drying effect of the coating

Appearance：Pink liquid

Metal Content：6±0.5%

Solvent：Alcohol ether, Mineral oil

Performance Characteristics：
* A water-based product composed of multiple metal composites can provide good initial water resistance and excellent later hardness of the coating film
* Especially suitable for high viscosity water-based coatings, easy to disperse, good compatibility; It can also be used in light colored paints, without causing yellowing of the coating, and can achieve fast drying and stable drying effect of the coating

Appearance：Colorless to pale yellow viscous liquid

Solid Content，%(120℃，1h)：70～85

Viscosity，mPa·s(25℃)：1000～2000

Solubility in solvents：Total dissolution

Flash Point，℃：≥70

Performance Characteristics：
* It is a harmless substitute for organotin, chromium, and lead catalysts; Accelerate the chemical reaction between polyurethane and isocyanate to achieve optimal drying performance; Ensure rapid crosslinking stability; Reduce yellowing; Improve the hardness of the paint film.
* Two component polyester coating; Foam fields such as plastic tracks.

Appearance：Colorless to pale yellow viscous liquid

Solid Content，%(120℃，1h)：55～65

Solubility in solvents：Total dissolution

Flash Point，℃：≥70

Performance Characteristics：
* It is a harmless substitute for organotin, chromium, and lead catalysts; Accelerate the chemical reaction between polyurethane and isocyanate to achieve optimal drying performance; Ensure rapid crosslinking stability; Reduce yellowing; Improve the hardness of the paint film.
* Two component polyester coating; Foam fields such as plastic tracks.

P-19 Anionic sodium polyacrylate:excellent wetting and dispersibility, improving coating coverage, glossiness, and wash resistance.

P-19 Clean and efficient anionic sodium polyacrylate: excellent wetting and dispersibility, especially for light calcium and iron based pigments, with high cost-effectiveness.

9020 anionic sodium polyacrylate: suitable for dispersing organic-inorganic fillers such as titanium dioxide, chrome yellow, phthalocyanine blue, and iron yellow, with excellent water resistance, suitable for exterior wall coatings.

9040 anionic sodium polyacrylate: suitable for dispersing organic-inorganic fillers such as titanium dioxide, chrome yellow, phthalocyanine blue, and iron yellow, with low foaming properties.

P-998 Special anionic sodium polyacrylate: with low dosage, high dispersibility, significant viscosity reduction, the prepared color paste has excellent water resistance. Dispersed and stored stably, it can be used for organic and iron-based pigments.

P1900 High molecular weight block copolymer solution containing pigment affinity groups: a wetting and dispersing agent free of VOCs and solvents, it is a standard additive for resin free pigment concentrates. Its excellent color development and stability bring good gloss and flowability to various water-based coating systems, especially suitable for carbon black and organic pigments.

9802  9802 styrene acrylic lotion: good mechanical and chemical stability, water resistance, scrub resistance, alkali resistance and aging resistance, suitable for various internal and external wall flat paint, mercerized and high gloss paint, wall and floor tile adhesive.

9804  9804 styrene acrylic lotion: suitable for sealing paint, cement paste adhesive and inorganic fireproof board adhesive applied on the bottom of various internal and external walls.

HLD061：Main drying agent, with good fast drying and excellent post hardness, excellent hydrolysis resistance and miscibility, and extremely low VOC. It can be used in various systems of varnish and paint, such as water-based epoxy ester, water-based alkyd and other air dry oxidation crosslinking systems, as well as water-based ink and high solid resin systems. It can be used in combination with manganese to reduce costs.

HLD064：Main drying agent, with good fast drying and excellent post hardness, excellent hydrolysis resistance and miscibility, and extremely low VOC. It can be used in various system paints, such as water-based epoxy ester, water-based alcohol acid and other air dry oxidation crosslinking systems, as well as water-based ink and high solid resin systems. It can be combined with cobalt to improve drying performance.

FED-080： A new generation of water-based composite drying agent. Not only does it have good fast drying properties, but it can also effectively increase the hardness of the paint film after drying, and effectively reduce the yellowing of the paint film. It effectively solves the problem of "dehydration" in water-based systems, especially suitable for white or light colored paints.

3016 Mineral Oil Defoamer: Efficient, durable, versatile, and stable in storage. Effectively eliminate foam in various latex paints and emulsified adhesives, and have no side effects. It is applicable to polyalcohol based interior and exterior wall coatings, art coatings, printing and plate making, industrial detergents, printing and dyeing, paper making, etc.

3020 Organic Silicon Polyacrylate Leveling Agent: Good compatibility, endows the coating with good leveling properties. Suitable for latex paints such as styrene acrylic, ethylene propylene, and pure propylene.

ANP-95 Multifunctional additives containing hydroxyl and amino groups: various functional organic amines can be used as wetting agents to reduce the foam of the system, increase the water resistance of the paint film to replace ammonia as a PH regulator, with a relatively wide buffer range, improve the system odor, reduce the corrosion in the tank, and obtain good can opening effect.

981、982 bactericides:efficient, broad-spectrum, environmental friendly, mildew resistant, free of organic solvents and formaldehyde, with excellent physical and chemical compatibility, suitable for a wide range of PH values, suitable for latex paints, lotion, adhesives, industrial water purification and other related products.

CF-01 Wetting agent: It can quickly achieve wetting effect on pigments and fillers such as titanium dioxide, talc powder, heavy calcium, light calcium, etc., and maintain good stability; Provide good color development for most organic pigments and improve coating adhesion.

T-117A Anionic polyacrylic esters: excellent thickening and leveling properties, non matting, small dosage, stable storage.

TAE106 Anionic polyacrylate (cross-linked polymer lotion containing acid group): effectively improve low shear viscosity, make the system have high pseudoplasticity, effectively reduce roll coating spatter, and maintain long-term stability of coating viscosity. Can be used for various water-based coatings, inks, fabric coatings, electrostatic flocking, adhesives.

TAE107 Hydrophobically modified alkali soluble polymer lotion thickener: it can be used as the preferred thickener or synergistic thickener for water-based coatings. Using it alone in a small amount can effectively improve the flowability and leveling of the coating.

Usage: Unsaturated resin and various air dried coatings, specially used in rubber, made of benzoic acid, catalytic and catalytic drying of air dried coatings, butadiene rubber, organic synthesis, various air dried coatings, alkyd varnish, enamel and other air dried coatings, used for ship anti fouling paint and submarine cable anti fouling.

Usage: Manufacturing of various air dry coatings, alkyd varnish, enamel and other air dry coatings, ship coatings, ship anti fouling coatings, submarine cable anti fouling, anti-corrosion coatings.

Usage: Various types of alkyd resin varnish and alkyd enamel, alkyd blended paint, various air dry coatings and light colored paints, and polyester modified alkyd resin.

Lanshui EC-6: This product is an activator that can accelerate the decomposition of initiators and achieve rapid curing of unsaturated polyester resin at room temperature, especially suitable for PE coatings. Good compatibility and dispersibility, easy to polish.

Lanshui EC-6B: This product is a promoter composed of various metal soaps, which can accelerate the decomposition of initiators and achieve rapid curing at room temperature, especially suitable for PE coatings. It has the characteristics of light color, compatibility, good dispersibility, short curing time, and easy polishing.

Usage: Manufacturing of various inks, formulation of ink additives, manufacturing of inks, and manufacturing of oil painting pigments.

DP-100 Solution of high molecular weight block copolymers: can be used for alkyd, epoxy, acrylic, polyester polyurethane, acrylic polyurethane, and alkyd polyurethane systems under room temperature drying, as well as for alkyd amino, polyester, and acrylic amino systems under forced drying and baking. Suitable for both inorganic and organic pigments, especially for good dispersion of carbon black.

DP-150 Polycarboxylate organic amine electrically neutral salt: suitable for inorganic pigments, iron oxide pigments, chromium yellow iron pigments, chromium green, titanium dioxide and other powders, can be used for oil-based resins, nitro paints, acrylic paints, amino based, alkyd, polyester, two-component polyurethane and other resin and coating systems, but not suitable for moisture cured single component polyurethane and water-based paints

DA-168 Multi active group polymer quaternary ammonium salt: a special wetting and dispersing agent for carbon black, which anchors carbon black molecules through multiple active groups, allowing carbon black to be quickly and fully wetted and dispersed.

CP-88 Organic phosphate ester liquid: suitable for various rust proof, anti-corrosion primers, and various pigment and filler resins.

Anti caking agent 841: This product is methyl ethyl ketoxime, which has the characteristics of high oxime content and light color. Used in various alkyd resin paints to eliminate peeling without damaging the physical and mechanical properties of the paint; This product can also be used as a silicate crosslinking agent.

CF-1008A water substitute oil additive: This product is formulated by blending polyether functional polymers with various coating additives. Used in self drying solvent based coatings (phenolic paint, alkyd paint, epoxy ester paint), it has thickening, anti settling, and drying promoting effects.

Self cleaning agent GY100: a solvent based coating additive of special silane, which can accumulate on the surface of the coating, making it difficult for dirt to adsorb, and can make the coating surface hydrophilic, achieving the effect of stain resistance.

Anti caking agent GY101: It is a solvent based coating additive containing silicon, which can accumulate on the surface of the coating, making it difficult for dirt to adsorb, and can make the coating surface hydrophilic, achieving the effect of stain resistance.